Go to the menu Go to the content Go to the footer

Enabler 12S


Control up to twelve lights, doors or other elements

Enabler 12S is a device with twelve switched relay contacts that allows you to control two different elements of your environment.

It can be activated remotely via any of our controllers or manually by means of wall switches.

Use it to control electrical appliances such as lights, doors, recessed plugs or others. It must be powered at 230 VAC.

Choose from four operanting modes: latched, dead man, combined and 1-second pulse.

It has also 4 low voltage outputs to control extra external relays, indicators, LED’s or as a interface with other produts.

This device requires Enabler Core to work. This device is part of our environmental control solution.

Suitable for

  • Physical disabilities: spinal cord injuries, multiple sclerosis, ALS, neuromuscular disorders...
  • Cerebral palsy
  • Brain injuries: ictus, traumatic brain injury...

  • Power suply: 230VAC
  • Supply voltage: 5VDC
  • Controllable remotely using our remotes or manually by means of wall switches
  • Size: 150 x 59 x 36 mm.
  • Radio Frequency: 433 MHz.
  • Four operating modes selected with the jumpers: latched, dead man, combined and 1 second pulse
  • In combined mode, the operating mode depends on the length of the click:

- Short click: latched (auto-off at 55 seconds) .
- Long click: dead man

  • Control input terminal for manual control
  • Maximum load:

- Inductive loads: 3.5A/350W/cosφ=0.4.
- Compensated fluorescents: 100W.
- Halogen lamps with transformer: 2,8A/500W/cosφ=0,76.

  • Compatible with wall switch
  • 4 digital low voltage outputs (0-5V)
  • RS-232 port to connect to Enabler Core

Write a review

* Required fields

Send to a friend

* Required fields

  or  Cancel