New

Control 2 Plus

BJ-246-2

Your environment, in just two buttons. Control 2 Plus offers new possibilities for users who need a simpler way to control up to two elements or two functions of the same element—lights, blinds, doors, TV, air conditioning… all from a remote that’s easy to program.

Control 2 Plus is designed for those who need a basic control solution. With its two programmable functions, you can manage essential elements at home or in a care center (for example, raising/lowering blinds or opening/closing a door) as well as infrared devices such as the TV, air conditioning, or a music system.

It can be configured directly from the remote itself or through the Android app Control Configurator, which simplifies programming and allows you to save profiles. Its design—with large buttons, accidental-press detection, and the option to create sequences—makes it more comfortable, reliable, and adaptable to each person’s daily routine.

Configure the remote from the App

Connect, customize, and save your favorite setup—no codes, no complications. The free Control Configurator app (available for Android 9 or later) lets you configure the remote from your phone via USB-C cable, with a clear and accessible interface.

What you can do with the app:

Import the configuration from your current remote, edit it, and send it back to the device.
Create configurations from scratch for Control 2 Plus, 4 Plus, or 6 Plus.
Assign actions to each button (radiofrequency, infrared, GewaLink, KNX, scene switching…).
Save your configurations in the app’s library to use later or duplicate onto another remote.
Adjust parameters such as debounce time or action sequences.

In just a few minutes, your remote will be ready to control doors, blinds, lights, or any infrared-based equipment.

Download the app on Google Play:

https://play.google.com/store/apps/details?id=com.bjliveat.bjcontrol246

Step-by-step guide and technical support:

https://support.qinera.com/en/productos/control-configurator-2/

Create sequences for your daily routines

Control 2 Plus is designed for basic use, but it also lets you chain multiple actions to a single button to simplify everyday tasks. For example, when pressing “exit,” the remote can turn off the living-room light and lower the blind; or when pressing “TV,” it can switch on the television and turn on the light.

These are simple, practical sequences that save steps and prevent errors. You can set them up in minutes using the Control Configurator (Android) app—no codes or complex combinations required: choose the two actions you use most, put them in order, and save your routine.

Suitable for

People with physical disabilities (spinal cord injury, MS, ALS, neuromuscular disorders…)
Cerebral palsy
Acquired brain injuries (stroke, TBI)
Older adults who need simple control

Download PDF

Number of slots: 2
Functions per slot: 1
Total functions: up to 2
Raised buttons for easy localization
3.7 V – 400 mAh Li-ion polymer battery (long autonomy)
USB-C 2.0 for charging and data (cable included) – minimum 1 A charger
RF: 433 MHz (ICM)
IR: 38 kHz, 56 kHz
GewaLink IR signal database
Database for Siemens IR-KNX devices
Hanging clip • Ergonomic design
Dimensions: 82 × 50 × 16.5 mm

First define the 2 key actions in your day (e.g. door and blind) to minimize steps.
Activate debounce time if there are tremors or unwanted repeated presses.
Use the Control Configurator app to save a backup and clone the configuration when needed.
Create sequences for routines (e.g. “leaving home”: turn off lights → open door).